Refurbishment and protection line

EPOX RIPRESA

Two-component, pourable, epoxy structural adhesive for cold joints and repairs.

EP FIX

Two-component epoxy paste adhesive for structural bonding and repairs.

EP FIX FAST

Two-component epoxy paste adhesive for quick structural bonding and repairs. Ideal for cold climates (5 - 20°c).

EP FIX SUB

Two-component thixotropic structural epoxy adhesive for underwater applications. Ideal for structural bonding, repairs and protective skim coats.

EP FIX SBA

Two components high strength epoxy paste adhesive for structural bonding of hardened concrete for segmental bridge construction. Version for mild climate (18-30°c).

COLLACEM

Micronized latex adhesive, eco-friendly with water, for preparing grout and mortar mixes for cold joints.

EP FIX HP

Two-component epoxy paste with improved bonding for structural repairs. Ideal for the bonding of flexijoint flexible tpe tapes.

PRESIDIO SRA

Internal curing additive for the reduction of drying shrinkage and the control of micro-cracking. Specifically for use with the flueco shrinkage-compensated mortars.

TIME EXTENDER

Retarding admixture for fast-setting cement mortars. Specific for use with flueco blitz and flueco blitz r4 mortars.

FLUECO 40T

Nano polymeric thixotropic, fibre-reinforced cement mortar with shrinkage compensation and high resistance for structural restoration. Layer thickness up to 5cm without electro-welded mesh.

FLUECO 55 T

High performance, fibre-reinforced, thixotropic mortar with compensated shrinkage. Ideal for structural restorations in very aggressive environments. Layer thickness up to 4 cm without electro-welded mesh.

FLUECO 80C

Shrinkage-compensated, fibre-reinforced, pourable mortar with superior durability. Ideal for structural restorations in very aggressive environments. Layer thickness up to 4 cm without electro-welded mesh.

FLUECO 80C QUICK

Fast-setting, shrinkage-compensated, castable mortar with superior durability suitable for structural repairs. Ideal in very aggressive environments layer thickness up to 4 cm.

FLUECO 80T2

Two-component thixotropic fibre-reinforced mortar with low modulus of elasticity and shrinkage compensation. Ideal for structural repairs in aggressive environments and in the presence of load deformation. Layers up to 4 cm thick.

FLUECO 80T

Shrinkage-compensated fibre-reinforced thixotropic mortar for the repair of concrete. Ideal for structural restorations in very aggressive environments. Layer thickness up to 4 cm without electro-welded mesh.

FLUECO 80T FIBER

Thixotropic, fibre-reinforced cement mortar with shrinkage compensation. Ideal for structural restorations in very aggressive environments. Layer thickness up to 4 cm without electro-welded mesh. Layer thickness up to 5cm without electro-welded mesh.

FLUECO 100 AR

Abrasion-resistant, thixotropic, controlled-shrinkage, rheoplastic grout applicable by spray for structural repairs

DRACOSTEEL

Re-alkaliser treatment of reinforcement bars protecting against corrosion

CONCRETE FINISHER

One-component cement-based smoothing mortar for thin refurbishments and restoration of concrete (1-4 mm). High protection against carbonation.

CONCRETE FINISHER 2

Two-component cementitious skim mortar with low modulus of elasticity for smoothing and thin repairs (1÷4 mm). High resistance to carbonation and aggressive environments.

FLUECO 77T

FLUECO 77 CABLE

Injectable and pumpable shrinkage compensated grout with high resistance.

FLUECO 75

Fluid, expansive mortar for precision anchoring of machinery and structural elements. Layer thickness from 1 to 10 cm

FLUECO 35

Expansive shrinkage compensated grout for precision anchoring. Applied on layers thicker than 7 cm.

FLUECO 77T GROUTING

High-resistance injectable and pumpable expansive thixotropic mortar for overhead anchoring.

EPOX INIEZIONE R.M.2

Two-component, solvent-free fluid epoxy resin with low viscosity for reinforcement injections and repairs by pouring

EPOX INIEZIONE R.M.3

Two-component, solvent-free fluid epoxy resin with low viscosity for reinforcement injections and repairs by pouring. Ideal for hot climates.

PRIMER PS30

One-component consolidating and adhesion promoting polyurethane primer.

PRIMER ES40

Two-component solvent-based epoxy impregnation primer for consolidation.

ACRIPRIMER

Water-borne acrylic primer. Effective as a sealant and adhesion promoter.

ACRIPAINT

Breathable acrylic resin protecting against carbonatation for concrete structures.

ACRIFLEX

Flexible, waterproof resin protecting against carbonatation for concrete structures.

EPOWALL

Rivestimento epossidico chimico resistente

DRACOLOR

Decorative, protective and breathable solvent containing coating based on methacrylic resins for concrete surfaces

POLIFLEX PP

Flexible, protective, two-component polyurethane coating in solvent phase. Ideal as film-forming coating for reinforced concrete protection.

ARMOGRIP MONO

Application

ARMOGRIP

Application

ARMOGRIP BC

Application

LINE REFURBISHMENT AND PROTECTION

Structural reinforcement system with pultruded blades in unidirectional high strength carbon fiber and epoxy resin. Assessment certificate (cvt) pursuant to chapter 11, point 11. 1, letter c) of ministerial decree 17. 1. 2018

ARMOGRIP C

Application

ARMOFIX MTL

Application

ARMOFIX MTX

Application

ARMONET 350

Application

ARMONET B 250

Alkali resistant basalt fibre mesh for structural reinforcement of concrete load-bearing elements and masonry.

ARMOTECH MONO

One component highly-ductile thixotropic fibre-reinforced mortar enriched with lime and pozzolana. Ideal for seismic retrofitting of non-structural elements.

COVERFIX

Ready to use encapsulating treatment of type d for asbestos-cement. Specifically designed for stabilizing asbestos-cement sheets and coverings.

COVERFLEX

Flexible waterproof membrane for permanent encapsulation of cement-asbestos. A-b-c types in compliance with the italian ministerial decree 20/08/1999.